Stanseals provide a range of standard and bespoke hot water skid systems for use in the pharmaceutical, healthcare, food and beverage industry sectors in clean utilities.
Each Stanseals hot water skid system incorporate a stainless steel storage tank, hot water circulation pump, flexible stainless steel hose pipes, water heating system, sampling valves, drain valves and all sensor inlet valves. This is our entry level hot water utility system and can be adapted to the following application duties;
- Individual clean hot water generator – Temperature up to 95°C (203°F) - (CHW model)
- Combined clean hot & cold water generator – Temperature range 30°C to 95°C (86°F to 203°F) (CHCW model)
Our modular solutions include a range of pre-treatment systems each supplied with their own controls or configured for operation as part of a central control system. Some of the key design and technical features of the Stanseals Hot Water System includes;
Stanseals' Hot Water modular systems are designed to Current Good Manufacturing Practice (cGMP) and include the following design features.
- Tank and pipework materials of construction for optimum chemical and heat compatibility are typically Stainless Steel (316 or 316L)
- Elastomeric members such as gaskets and diaphragms are typically Teflon, EPDM, Silicone and Viton (FDA approved where required)
- The tanks are designed to be fully drainable (minimum slope 1/8” per foot
- Hygienic tank and system design of components - no bug traps
- Minimize Dead Legs (<= 2 pipe diameters)
- Smooth Surfaces - high mechanical polish/buff
- Mechanically sealed centrifugal Pump or Canned motor pump providing leak tight pumping.
- Gasketed or welded plate heat exchanger providing efficient and quick heat transfer.
- 2 way or 3 Way Globe Control Valve providing accurate temperature control of uid and product.
- Expansion tank to accommodate volume changes expected in thermal fluid.
- Strainers and non return valves for pump and equipment protection.
- Temperature transmitters and Pressure gauges for measurement of operating parameters.
- All electrical components like drive motor, wiring in flameproof construction.
- Seamless pipes and fitting in SS304 or on specific requirement.
- PID or PLC based control system.
- Simple Flameproof Operating Panel or IS HMI as man –machine interface.
- All components are assembled on compact skid to reduce installation and testing time at site.